Opel Vectra B

Since 1995 of release

Repair and car operation



Opel of Vektra
+ 1.1. Controls and control devices
+ 2. Maintenance service
+ 3. Engines
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. Systems of start, ignition
+ 7. Transmission
+ 8. Brake system
- 9. A running gear
   9.1. Introduction
   9.2. Technical characteristics
   9.3. Rotary fists
   9.4. Replacement of forward bearings of a nave
   9.5. A forward bottom frame
   9.6. A forward rack
   9.7. The stabilizer of cross-section stability of a forward suspension bracket
   9.8. The bottom lever of a forward suspension bracket
   9.9. Replacement of the bottom hinge of a forward suspension bracket
   9.10. A back nave
   9.11. A back rack
   9.12. The stabilizer of cross-section stability of a back suspension bracket
   9.13. The top lever of a back suspension bracket
   9.14. The bottom lever of a back suspension bracket
   9.15. A steering wheel
   9.16. A steering column
   9.17. An intermediate shaft of a steering column
   9.18. Replacement of protective covers of steering transfer
   9.19. Steering transfer
   - 9.20. The pump of the amplifier of a steering
      9.20.1. Petrol engines
      9.20.2. The diesel engine of 1,7 l
      9.20.3. The diesel engine of 2,0 l
   9.21. Removal of air from system of a steering with the amplifier
   9.22. A tip of steering draught
   9.23. Steering draught
   9.24. Corners of installation of wheels
+ 10. A body
+ 11. An electric equipment
+ 12. The basic malfunctions


9fd37707

9.20. The pump of the amplifier of a steering

9.20.1. Petrol engines Removal

PERFORMANCE ORDER
1. Remove the air filter.
2. Uncover a filling tank of hydraulic system of the amplifier of a steering and, using a syringe, pump out a liquid from a tank.
3. Remove auxiliary приводной a belt.
4. Establish the container under the pump of the amplifier of a steering, unscrew a bolt and disconnect the delivery pipeline.
5. Loosen the a collar also disconnect a returnable tube from the tank basis.
6. Unscrew four bolts and remove the pump of the amplifier of a steering together with the tank of a liquid for hydraulic system.

Installation

PERFORMANCE ORDER
Installation is made in sequence, return to removal. Fill in a new liquid in hydraulic system and remove air from system.