Opel Vectra B

Since 1995 of release

Repair and car operation



Opel of Vektra
+ 1.1. Controls and control devices
+ 2. Maintenance service
+ 3. Engines
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. Systems of start, ignition
+ 7. Transmission
+ 8. Brake system
- 9. A running gear
   9.1. Introduction
   9.2. Technical characteristics
   9.3. Rotary fists
   9.4. Replacement of forward bearings of a nave
   9.5. A forward bottom frame
   9.6. A forward rack
   9.7. The stabilizer of cross-section stability of a forward suspension bracket
   9.8. The bottom lever of a forward suspension bracket
   9.9. Replacement of the bottom hinge of a forward suspension bracket
   9.10. A back nave
   9.11. A back rack
   9.12. The stabilizer of cross-section stability of a back suspension bracket
   9.13. The top lever of a back suspension bracket
   9.14. The bottom lever of a back suspension bracket
   9.15. A steering wheel
   9.16. A steering column
   9.17. An intermediate shaft of a steering column
   9.18. Replacement of protective covers of steering transfer
   9.19. Steering transfer
   + 9.20. The pump of the amplifier of a steering
   9.21. Removal of air from system of a steering with the amplifier
   9.22. A tip of steering draught
   9.23. Steering draught
   9.24. Corners of installation of wheels
+ 10. A body
+ 11. An electric equipment
+ 12. The basic malfunctions


9fd37707

9.17. An intermediate shaft of a steering column

Removal

PERFORMANCE ORDER
1. Establish forward wheels for movement directly forward.
2. Remove furnish of the bottom part of the panel of devices from outside the driver, then remove an air line connecting the distributor and a heater.
3. Using a paint or a marker, put combination labels on an intermediate shaft and the bottom part of a steering column, and a gear wheel of steering transfer.
4. Unscrew the top and bottom tightening bolts of an intermediate shaft.
5. Remove the universal hinge of an intermediate shaft from a steering shaft and remove an intermediate shaft from a gear wheel of steering transfer.

Installation

Installation is made in sequence, return to removal.