Opel Vectra B
Since 1995 of release
Repair and car operation
Opel
of Vektra
+
1.1. Controls and control devices
+
2. Maintenance service
+
3. Engines
+
4. Heating, ventilation
+
5. Fuel system
+
6. Systems of start, ignition
+
7. Transmission
+
8. Brake system
-
9. A running gear
9.1. Introduction
9.2. Technical characteristics
9.3. Rotary fists
9.4. Replacement of forward bearings of a nave
9.5. A forward bottom frame
9.6. A forward rack
9.7. The stabilizer of cross-section stability of a forward suspension bracket
9.8. The bottom lever of a forward suspension bracket
9.9. Replacement of the bottom hinge of a forward suspension bracket
9.10. A back nave
9.11. A back rack
9.12. The stabilizer of cross-section stability of a back suspension bracket
9.13. The top lever of a back suspension bracket
9.14. The bottom lever of a back suspension bracket
9.15. A steering wheel
9.16. A steering column
9.17. An intermediate shaft of a steering column
9.18. Replacement of protective covers of steering transfer
9.19. Steering transfer
+
9.20. The pump of the amplifier of a steering
9.21. Removal of air from system of a steering with the amplifier
9.22. A tip of steering draught
9.23. Steering draught
9.24. Corners of installation of wheels
+
10. A body
+
11. An electric equipment
+
12. The basic malfunctions
9.13. The top lever of a back suspension bracket
THE GENERAL DATA
Levers of a back suspension bracket
Removal
PERFORMANCE ORDER
1.
Lift a back part of the car and fix on supports. Remove a corresponding back wheel.
2.
Unscrew an external bolt,
крепящий the
top lever to a back beam.
3.
Unscrew internal bolts of fastening (arrow) and remove the top lever from a back beam.
Installation
PERFORMANCE ORDER
Installation is made in sequence, return to removal, but a tightening of bolts of fastening make after car lowering on wheels.