Opel Vectra B

Since 1995 of release

Repair and car operation

Opel of Vektra
+ 1.1. Controls and control devices
+ 2. Maintenance service
- 3. Engines
   + 3.1. Repair of engine SOCH established in the car
   + 3.2. Repair of engine DOSH established in the car
   - 3.3. Repair of the diesel engine of 1,7 l established in the car
      3.3.1. Introduction
      3.3.2. Technical characteristics
      3.3.3. Check of pressure of compression
      3.3.4. The top dead point (ВМТ) the piston of the first cylinder
      3.3.5. A cover of a head of the block of cylinders
      3.3.6. A pulley of a cranked shaft
      3.3.7. Casings of a gear belt
      3.3.8. Replacement of a gear belt
      3.3.9. The mechanism of a tension of a gear belt and pulleys
      3.3.10. Replacement of a sealing ring of a cam-shaft
      3.3.11. Check and adjustment of backlashes of valves
      3.3.12. A cam-shaft and pushers
      3.3.13. A head of the block of cylinders
      3.3.14. The oil pallet
      3.3.15. The oil pump
      3.3.16. An oil radiator
      3.3.17. A flywheel
      3.3.18. Replacement of sealing rings of a cranked shaft
      3.3.19. Replacement of support of the power unit
   + 3.4. Repair of the diesel engine of 2,0 l established in the car
   + 3.5. Major repairs of engines
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. Systems of start, ignition
+ 7. Transmission
+ 8. Brake system
+ 9. A running gear
+ 10. A body
+ 11. An electric equipment
+ 12. The basic malfunctions

3.3.16. An oil radiator
Removal

PERFORMANCE ORDER

1. Lift a forward part of the car and fix on supports.

2. Merge cooling liquid from system of cooling or press hoses of giving of a cooling liquid to an oil radiator.

3. Establish the corresponding container under the oil filter. Unscrew the oil filter.

4. Loosen the collars also remove hoses of giving of a cooling liquid to an oil radiator.

5. Unscrew the central bolt of fastening of an oil radiator and remove it from the engine.

Installation

PERFORMANCE ORDER

1. Establish an oil sealing ring in dredging of an oil radiator and establish an oil radiator on the block of cylinders.

2. Fix an oil radiator a bolt.

3. Connect to an oil radiator hoses of giving of a cooling liquid and fix their collars.

4. Establish the new oil filter. Lower the car and check up oil level in the engine.

5. Fill in cooling liquid in system of cooling of the engine. Start the engine and check up an oil radiator on tightness.