Opel Vectra B

Since 1995 of release

Repair and car operation



Opel of Vektra
+ 1.1. Controls and control devices
+ 2. Maintenance service
+ 3. Engines
+ 4. Heating, ventilation
- 5. Fuel system
   + 5.1. Fuel system of petrol engines
   - 5.2. Fuel systems of the diesel engine
      5.2.1. Introduction
      5.2.2. Technical characteristics
      5.2.3. The air filter and air inlet channels
      5.2.4. An accelerator pedal
      5.2.5. Filling and prorolling of fuel system
      5.2.6. The gauge of level of fuel
      5.2.7. A fuel tank
      5.2.8. Check and adjustment of the maximum turns
      5.2.9. Start of the cold engine
      + 5.2.10. Electric knots of system of injection
      5.2.11. The fuel pump of a high pressure
      5.2.12. Check of the moment of injection of fuel
      5.2.13. Adjustment of the moment of injection of fuel
      5.2.14. Fuel atomizers
      5.2.15. Турбонагнетатель
      5.2.16. The heat exchanger
      5.2.17. An inlet collector
      5.2.18. A final collector
+ 6. Systems of start, ignition
+ 7. Transmission
+ 8. Brake system
+ 9. A running gear
+ 10. A body
+ 11. An electric equipment
+ 12. The basic malfunctions



5.2.8. Check and adjustment of the maximum turns

Engines of 1,7 l

PERFORMANCE ORDER
1. Warm up the engine to normal working temperature.
2. Press an accelerator pedal against the stop no more than on 2 – 3 seconds and check up that the maximum turns of the engine correspond to technical requirements.
3. If adjustment is required, switch off the engine, ослабьте a counternut and turn the screw of adjustment of the maximum turns (1) and repeatedly tighten a counternut.
4. Repeatedly check up the maximum turns of the engine.

Engines of 2 l

The maximum turns of the engine are established by block ECU and cannot be adjusted.