Opel of Vektra
+ 1.1. Controls and control devices
+ 2. Maintenance service
+ 3. Engines
+ 4. Heating, ventilation
- 5. Fuel system
+ 5.1. Fuel system of petrol engines
- 5.2. Fuel systems of the diesel engine
5.2.1. Introduction
5.2.2. Technical characteristics
5.2.3. The air filter and air inlet channels
5.2.4. An accelerator pedal
5.2.5. Filling and prorolling of fuel system
5.2.6. The gauge of level of fuel
5.2.7. A fuel tank
5.2.8. Check and adjustment of the maximum turns
5.2.9. Start of the cold engine
+ 5.2.10. Electric knots of system of injection
5.2.11. The fuel pump of a high pressure
5.2.12. Check of the moment of injection of fuel
5.2.13. Adjustment of the moment of injection of fuel
5.2.14. Fuel atomizers
5.2.15. Турбонагнетатель
5.2.16. The heat exchanger
5.2.17. An inlet collector
5.2.18. A final collector
+ 6. Systems of start, ignition
+ 7. Transmission
+ 8. Brake system
+ 9. A running gear
+ 10. A body
+ 11. An electric equipment
+ 12. The basic malfunctions
|
Removal and installation
THE ENGINE OF 1,7 L
PERFORMANCE ORDER
|
1. In car salon unscrew clips and remove the bottom panel from outside the driver. |
2. Remove a cable of an accelerator from the top part of a pedal of management of fuel giving. |
3. Unscrew nuts and remove a pedal in gathering from a partition of a motor compartment. |
4. Installation is made in sequence, return to removal. |
|
THE ENGINE OF 2,0 L
PERFORMANCE ORDER
|
|
1. In car salon unscrew clips of fastening of furnish furnish of the bottom part of the panel of devices. |
|
2. Remove furnish of the bottom part of the panel of devices from outside the driver for access to an accelerator pedal. |
3. Disconnect an electric socket from the gauge of position of a pedal of an accelerator. |
4. Unscrew nuts and remove an accelerator pedal in gathering. |
5. Installation is made in sequence, return to removal. |
|
|
|