Opel Vectra B

Since 1995 of release

Repair and car operation



Opel of Vektra
+ 1.1. Controls and control devices
+ 2. Maintenance service
+ 3. Engines
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. Systems of start, ignition
- 7. Transmission
   + 7.1. Coupling
   + 7.2. A mechanical transmission
   - 7.3. An automatic transmission
      7.3.1. Introduction
      7.3.2. Technical characteristics
      7.3.3. Oil replacement in a transmission
      7.3.4. Adjustment of the lever of the selector
      7.3.5. A selector cable
      7.3.6. The selector lever
      7.3.7. Replacement of a sealing ring of the hydrotransformer
      7.3.8. Electric elements of management of a transmission
      7.3.9. The switch of a manner of movement
      7.3.10. The electronic control device
      7.3.11. Gauges of an entrance and conducted shaft of a transmission
      7.3.12. The gauge of temperature of oil of a transmission
      7.3.13. Removal and transmission installation
      7.3.14. Transmission major repairs
   + 7.4. Power shafts
+ 8. Brake system
+ 9. A running gear
+ 10. A body
+ 11. An electric equipment
+ 12. The basic malfunctions



7.3.6. The selector lever

Removal and installation

PERFORMANCE ORDER
1. Remove the central console and establish the selector lever in River position
2. Disconnect electric sockets from switches of the lever of the selector and remove a cartridge of a bulb from the block of indicators.
3. Using an edge of a thin screw-driver as the lever, remove a cable of the selector from the spherical hinge at the lever basis. Remove a cover of a cable of the selector from a forward part of an arm of installation of the lever.
4. Unscrew bolts and remove the selector lever.
5. Installation is made in sequence, return to removal. Thus it is necessary to adjust a selector cable.