Opel Vectra B

Since 1995 of release

Repair and car operation

Opel of Vektra
+ 1.1. Controls and control devices
+ 2. Maintenance service
+ 3. Engines
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. Systems of start, ignition
- 7. Transmission
   + 7.1. Coupling
   + 7.2. A mechanical transmission
   - 7.3. An automatic transmission
      7.3.1. Introduction
      7.3.2. Technical characteristics
      7.3.3. Oil replacement in a transmission
      7.3.4. Adjustment of the lever of the selector
      7.3.5. A selector cable
      7.3.6. The selector lever
      7.3.7. Replacement of a sealing ring of the hydrotransformer
      7.3.8. Electric elements of management of a transmission
      7.3.9. The switch of a manner of movement
      7.3.10. The electronic control device
      7.3.11. Gauges of an entrance and conducted shaft of a transmission
      7.3.12. The gauge of temperature of oil of a transmission
      7.3.13. Removal and transmission installation
      7.3.14. Transmission major repairs
   + 7.4. Power shafts
+ 8. Brake system
+ 9. A running gear
+ 10. A body
+ 11. An electric equipment
+ 12. The basic malfunctions

7.3.12. The gauge of temperature of oil of a transmission

The temperature gauge is screwed in in the basis of a forward part of a transmission.


1. Remove a wire of weight from the accumulator.
2. Lift a forward part of the car and fix on supports.
3. Disconnect the electric socket of the gauge located on wires and release conducting of the gauge from скоб fastenings.
4. Unscrew bolts (are specified by arrows) and uncover the gauge.
5. Unscrew the temperature gauge (it is specified by an arrow) from картера transmissions. Quickly close a nest for installation of the gauge of temperature by a stopper.


Installation is made in sequence, return to removal. Thus on the gauge it is necessary to establish a new sealing ring.