Opel Vectra B

Since 1995 of release

Repair and car operation

Opel of Vektra
+ 1.1. Controls and control devices
+ 2. Maintenance service
+ 3. Engines
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. Systems of start, ignition
- 7. Transmission
   + 7.1. Coupling
   + 7.2. A mechanical transmission
   - 7.3. An automatic transmission
      7.3.1. Introduction
      7.3.2. Technical characteristics
      7.3.3. Oil replacement in a transmission
      7.3.4. Adjustment of the lever of the selector
      7.3.5. A selector cable
      7.3.6. The selector lever
      7.3.7. Replacement of a sealing ring of the hydrotransformer
      7.3.8. Electric elements of management of a transmission
      7.3.9. The switch of a manner of movement
      7.3.10. The electronic control device
      7.3.11. Gauges of an entrance and conducted shaft of a transmission
      7.3.12. The gauge of temperature of oil of a transmission
      7.3.13. Removal and transmission installation
      7.3.14. Transmission major repairs
   + 7.4. Power shafts
+ 8. Brake system
+ 9. A running gear
+ 10. A body
+ 11. An electric equipment
+ 12. The basic malfunctions

7.3.5. A selector cable

Removal and installation

1. Remove the central console and establish the selector lever in River position
2. Using an edge of a thin screw-driver (it is specified by an arrow) as the lever, remove a cable of the selector (2) with spherical шарнирного connections (3) at the basis of the lever of the selector. Release a cable of the selector from a forward part of an arm of the lever of the selector.
1 – скоба fastenings.
3. Remove the accumulator and an accumulator support.
4. Remove a cable of the selector from the lever of a choice of transfers on a transmission. Remove from an arm a cover of a cable of the selector.
5. Disconnect a cable of the selector from all скоб fastenings. Take a sealing ring of a cable of the selector from a partition of a motor compartment and take a selector cable.
6. Installation is made in sequence, return to removal, thus it is necessary to adjust a selector cable.