| The right sealing ring |
| 1. Remove a pulley of a cranked shaft. |
|
2. Drill in a sealing ring two small apertures, located in the opposite ends of consolidation. Screw in two self-cutting screws in the drilled apertures of a sealing ring and, using flat-nose pliers, take for heads of screws a sealing ring. |
| 3. Clear a nest of a sealing ring. |
|
4. Grease working edges of a new sealing ring with fresh engine oil and, using tubular оправку, establish a sealing ring in a nest. |
| 5. Clear all traces of oil, then establish a pulley of a cranked shaft. |
| The left oil sealing ring |
| 6. Remove a flywheel or a drive plate. |
| 7. Drill in a sealing ring two small apertures, located in the opposite ends of consolidation. Screw in two self-cutting screws in the drilled apertures of a sealing ring and, using flat-nose pliers, take out for heads of screws a sealing ring. |
| 8. Clear a nest of a sealing ring. |
| 9. Grease working edges of a new sealing ring with fresh engine oil and, using tubular оправку, establish a sealing ring in a nest. |
| 10. Establish a flywheel or a drive plate. |