Opel Vectra B

Since 1995 of release

Repair and car operation



Opel of Vektra
+ 1.1. Controls and control devices
+ 2. Maintenance service
- 3. Engines
   + 3.1. Repair of engine SOCH established in the car
   - 3.2. Repair of engine DOSH established in the car
      3.2.1. Introduction
      3.2.2. Technical characteristics
      3.2.3. Compression check
      3.2.4. The top dead point (ВМТ) the piston of the first cylinder
      3.2.5. A cover of a head of the block of cylinders
      3.2.6. A pulley of a cranked shaft
      3.2.7. Casings of a gear belt
      3.2.8. A gear belt
      3.2.9. Pulleys of a gear belt, the mechanism of a tension and a single pulley
      3.2.10. Replacement of oil sealing rings of a cam-shaft
      3.2.11. A cam-shaft and pushers
      3.2.12. A head of the block of cylinders
      3.2.13. The oil pallet
      3.2.14. The oil pump
      3.2.15. The Flywheel / a drive plate
      3.2.16. Replacement of oil sealing rings of a cranked shaft
      3.2.17. A suspension bracket of the power unit
   + 3.3. Repair of the diesel engine of 1,7 l established in the car
   + 3.4. Repair of the diesel engine of 2,0 l established in the car
   + 3.5. Major repairs of engines
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. Systems of start, ignition
+ 7. Transmission
+ 8. Brake system
+ 9. A running gear
+ 10. A body
+ 11. An electric equipment
+ 12. The basic malfunctions


мебельный щит купить

3.2.10. Replacement of oil sealing rings of a cam-shaft

PERFORMANCE ORDER
1. Remove a corresponding pulley of a camshaft.
2. Drill two small apertures in end faces of a sealing ring, screw in two self-cutting screws and flat-nose pliers for heads of screws extend a sealing ring from a nest.
3. Clear a nest of a sealing ring and a condensed surface of a camshaft.
4. Grease working edges of a new sealing ring with pure engine oil and, using tubular оправку, establish a ring into place.
5. Establish a camshaft pulley.