Opel Vectra B

Since 1995 of release

Repair and car operation

Opel of Vektra
- 1.1. Controls and control devices
   1.2. A combination of devices
   1.3. Control bulbs
   1.4. The counter of the passed way and hours
   1.5. The Triple-Info-display
   1.6. The Multi-Info-display
   1.7. The Multi-Info-display - Check-control
   1.8. The Multi-Info-display - the Onboard computer
   1.9. Heating and ventilation system
   1.10. The conditioner
   1.11. Heating
   1.12. The electronic climate control
   1.13. System TC
   1.14. Cruise-control
   1.15. The catalyst
   1.16. A signalling device of electronic system of the engine
   1.17. System of release of the fulfilled gases
   1.18. An automatic transmission
   1.19. Instructions on driving
   1.20. Economy of fuel
   1.21. A fuel grade
+ 2. Maintenance service
+ 3. Engines
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. Systems of start, ignition
+ 7. Transmission
+ 8. Brake system
+ 9. A running gear
+ 10. A body
+ 11. An electric equipment
+ 12. The basic malfunctions

1.17. System of release of the fulfilled gases

During the first trip can occur дымообразное evaporation of wax and the oils which are available in system of release of fulfilled gases. To allow to this process to pass up to the end on an open place. To avoid smoke inhalation. To avoid inhalation of the fulfilled gases of the engine. Fulfilled gases of the engine to contain poisonous, and thus, colourless and flavourless, окись carbon. Its inhalation can be life-threatening.
If the fulfilled gases get to car salon it is necessary to open windows.

The engine with the control of toxicity of the fulfilled gases

Owing to the constructive measures spent in basic concerning the systems смесеобразования and ignition, such, as окись carbon (WITH), hydrocarbons (СН) and nitrogen oxides (NO) in the fulfilled gases the maintenance of toxic substances is lowered to a minimum.

The quantity of toxic substances as a part of the fulfilled gases is defined by excellent job of systems смесеобразования and ignitions. Therefore it is necessary, that all verifying and adjusting works were spent by the authorised workshop of firm Opel having the necessary equipment and the trained personnel. Electronic control systems allow to carry out diagnostics and updating quickly.