Opel Vectra B

Since 1995 of release

Repair and car operation



Opel of Vektra
+ 1.1. Controls and control devices
+ 2. Maintenance service
+ 3. Engines
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. Systems of start, ignition
- 7. Transmission
   - 7.1. Coupling
      7.1.1. Introduction
      7.1.2. Technical characteristics
      7.1.3. Removal of air from hydraulic system of coupling
      7.1.4. The main cylinder
      7.1.5. The working cylinder of coupling
      7.1.6. A coupling pedal
      7.1.7. Leading knot of coupling
   + 7.2. A mechanical transmission
   + 7.3. An automatic transmission
   + 7.4. Power shafts
+ 8. Brake system
+ 9. A running gear
+ 10. A body
+ 11. An electric equipment
+ 12. The basic malfunctions



7.1.6. A coupling pedal

Removal

PERFORMANCE ORDER
1. Remove the vacuum amplifier of brakes.
2. Take a pin, крепящий a pusher of the main cylinder to a coupling pedal.
3. Disconnect a returnable spring of a pedal of coupling.
4. Unscrew nuts, fastening the top part of an arm of a pedal of coupling.
5. In a motor compartment unscrew nuts of fastening of the main cylinder of coupling. Unscrew nuts of fastening of an arm of a pedal of coupling to a partition of a motor compartment. Take a pedal of coupling from car salon.

Installation

Installation is made in sequence, return to removal.