Opel Vectra B

Since 1995 of release

Repair and car operation


Opel of Vektra
+ 1.1. Controls and control devices
+ 2. Maintenance service
+ 3. Engines
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. Systems of start, ignition
- 7. Transmission
   - 7.1. Coupling
      7.1.1. Introduction
      7.1.2. Technical characteristics
      7.1.3. Removal of air from hydraulic system of coupling
      7.1.4. The main cylinder
      7.1.5. The working cylinder of coupling
      7.1.6. A coupling pedal
      7.1.7. Leading knot of coupling
   + 7.2. A mechanical transmission
   + 7.3. An automatic transmission
   + 7.4. Power shafts
+ 8. Brake system
+ 9. A running gear
+ 10. A body
+ 11. An electric equipment
+ 12. The basic malfunctions



7.1.5. The working cylinder of coupling

Removal

PERFORMANCE ORDER
1. Remove a transmission.
2. Unscrew a connecting nut and disconnect from the coupling cylinder a hydraulic pipe (). Unscrew three bolts of fastening () and remove the working cylinder of coupling from an entrance shaft of a transmission. Remove a sealing ring.

Installation

PERFORMANCE ORDER
1. Check up that interfaced surfaces of the working cylinder of coupling and картера transmissions pure and dry, and establish a new sealing ring in a transmission flute.
2. Oil the working cylinder of coupling and establish it into place, pulling over a primary shaft of a transmission. Check up that the sealing ring is in a flute картера transmissions, and fix the working cylinder bolts.
3. Connect to the working cylinder of coupling a hydraulic pipe.
4. Establish a transmission.