Opel Vectra B

Since 1995 of release

Repair and car operation



Opel of Vektra
+ 1.1. Controls and control devices
+ 2. Maintenance service
+ 3. Engines
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. Systems of start, ignition
- 7. Transmission
   + 7.1. Coupling
   - 7.2. A mechanical transmission
      7.2.2. Introduction
      7.2.2. Technical characteristics
      7.2.3. Oil replacement in a transmission
      7.2.4. Adjustment of the mechanism of a gear change
      7.2.5. The gear change mechanism
      7.2.6. Replacement of sealing rings
      7.2.7. The switch of a lantern of a backing
      7.2.8. Transmission removal
   + 7.3. An automatic transmission
   + 7.4. Power shafts
+ 8. Brake system
+ 9. A running gear
+ 10. A body
+ 11. An electric equipment
+ 12. The basic malfunctions



7.2.6. Replacement of sealing rings

Sealing ring of a power shaft

PERFORMANCE ORDER
1. Lift a forward part of the car and fix on supports. Remove a corresponding forward wheel.
2. Merge oil from a transmission.
3. Remove a power shaft.
4. Note depth of installation of a sealing ring, then, using a screw-driver as the lever, take a sealing ring.
5. Carefully clear a nest of a sealing ring, then fill working edges of a new sealing ring with lubricant.
6. Establish a new sealing ring into place, using corresponding tubular оправку.
7. Establish a power shaft.
8. Fill in oil in a transmission.

Sealing ring of an entrance shaft

PERFORMANCE ORDER
The sealing ring of an entrance shaft of a transmission is an integral part of the cylinder of deenergizing of coupling. If replacement of a sealing ring of an entrance shaft is necessary, it is necessary to replace the working cylinder of coupling in gathering.