Opel Vectra B

Since 1995 of release

Repair and car operation

Opel of Vektra
+ 1.1. Controls and control devices
+ 2. Maintenance service
+ 3. Engines
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. Systems of start, ignition
- 7. Transmission
   + 7.1. Coupling
   - 7.2. A mechanical transmission
      7.2.2. Introduction
      7.2.2. Technical characteristics
      7.2.3. Oil replacement in a transmission
      7.2.4. Adjustment of the mechanism of a gear change
      7.2.5. The gear change mechanism
      7.2.6. Replacement of sealing rings
      7.2.7. The switch of a lantern of a backing
      7.2.8. Transmission removal
   + 7.3. An automatic transmission
   + 7.4. Power shafts
+ 8. Brake system
+ 9. A running gear
+ 10. A body
+ 11. An electric equipment
+ 12. The basic malfunctions

7.2.3. Oil replacement in a transmission

As periodic replacement of oil in a transmission is not provided, in картере transmissions there is no drain stopper.

Plums of oil from a transmission will be faster and effective if this operation to make after warming up of the engine to working temperature and carrying out of a control trip for transmission warming up.

1. Lift a forward part of the car and fix on supports. Remove an engine mudguard.
2. Wipe area about a cover of differential and establish the container for oil.
3. In regular intervals and gradually unscrew bolts of fastening of a cover of differential and merge engine oil in the container.
4. After oil plum wipe interfaced surfaces of a transmission and a cover of differential and establish a cover of differential with a new lining and fix bolts.
5. Lower the car and fill in oil in a transmission through an aperture for installation сапуна. Unscrew сапун, located on the top part of the mechanism of a gear change (a photo at the left), and after oil pouring (a photo on the right) screw up it into place.