Opel Vectra B

Since 1995 of release

Repair and car operation



Opel of Vektra
+ 1.1. Controls and control devices
+ 2. Maintenance service
+ 3. Engines
+ 4. Heating, ventilation
+ 5. Fuel system
- 6. Systems of start, ignition
   - 6.1. Gymnastics system
      6.1.1. Introduction
      6.1.2. Technical characteristics
      6.1.3. Accumulator check
      6.1.4. Accumulator gymnastics
      6.1.5. The accumulator
      6.1.6. The generator
   + 6.2. Start system
   + 6.3. Ignition system
   + 6.4. System of prestarting heating of diesel engines
+ 7. Transmission
+ 8. Brake system
+ 9. A running gear
+ 10. A body
+ 11. An electric equipment
+ 12. The basic malfunctions


9fd37707

6.1.6. The generator Removal

PERFORMANCE ORDER
1. Lift a forward part of the car and fix on supports. Remove a mudguard. Remove a wire of weight from the accumulator.
Engine SOCH of 1,6 l and engines of 1,8 and 2,0 l
2. Remove a casing of the air filter and the inlet channel of air.
3. Loosen the a tension auxiliary drive a belt also remove it from a generator pulley.
4. Unscrew a bolt and remove draught of the jack of a twisting moment from the right part of a head of the block of cylinders.
5. Unscrew bolts and remove an arm of fastening of the generator to a final collector and a head of the block of cylinders.
6. Remove a rubber cover, unscrew nuts and disconnect electric wires from the generator.
7. Unscrew bolts of fastening of the bottom arms of the generator to the block of cylinders and take the generator from a motor compartment.
8. Unscrew bolts of fastening of the bottom arm of the generator to the generator and remove an arm from the generator.
Petrol engines DOCH of 1,6 l
9. Loosen the a tension auxiliary drive a belt also remove it from a generator pulley.
10. Unscrew bolts and separate the inlet channel of air from an inlet collector.
11. Remove a rubber cover, unscrew nuts and disconnect electric wires from the generator.
12. Unscrew bolts of fastening of the bottom arm of the generator to the block of cylinders.
13. Unscrew a bolt of fastening of draught of the jack of a twisting moment to the right party of a head of the block of cylinders.
14. Unscrew the top bolt of fastening of the generator and take its top from a motor compartment.
15. Unscrew bolts of fastening of arms to the generator and remove them from the generator.
The diesel engine of 1,7 l
16. Loosen the a tension auxiliary drive a belt also remove it from a generator pulley.
17. Remove the vacuum pump of brake system which is established on a back part of the generator.

The prevention

If the generator is not subject to replacement, the pump can be left on the generator. Thus it is necessary to disconnect a vacuum hose and pipelines of giving of oil from the pump.


18. Disconnect the electric socket located on wires, going to the generator.
19. Unscrew bolts of fastening of the generator and take the generator from under the car.
The diesel engine of 2,0 l
20. Loosen the a tension auxiliary drive a belt also remove it from a generator pulley.
21. Remove a casing of the air filter together with an air inlet and a measuring instrument of a stream of air.
22. Unscrew a bolt, крепящий an arm of a plait of wires to a back part of the block of cylinders.
23. Unscrew nuts and remove the heat resisting screen of the generator.
24. Unscrew nuts (are specified by arrows) and disconnect wires from the generator.
25. Unscrew a bolt of fastening of an arm of the electromagnetic valve заслонки турбонагнетателя, located in the right corner of a motor compartment. Move the valve aside from the generator, without disconnecting from it wires or hoses.
26. Unscrew the top bolt of fastening of the generator.
27. Unscrew the bottom bolt of fastening of the generator.
28. Take it upwards the generator from a motor compartment.
29. For generator removal merge cooling liquid from cooling system.
30. Disconnect a hose of a cooling liquid from a back part of a head of the block of cylinders.
31. Remove a casing of an exit of a cooling liquid from a back part of a head of the block of cylinders.
32. Remove the generator.

Installation

Installation is made in sequence, return to removal.