Opel of Vektra
+ 1.1. Controls and control devices
+ 2. Maintenance service
+ 3. Engines
+ 4. Heating, ventilation
+ 5. Fuel system
- 6. Systems of start, ignition
+ 6.1. Gymnastics system
- 6.2. Start system
6.2.1. Introduction
6.2.2. Technical characteristics
6.2.3. A starter
6.2.4. The gauge of pressure of oil
6.2.5. The gauge of level of oil
+ 6.3. Ignition system
+ 6.4. System of prestarting heating of diesel engines
+ 7. Transmission
+ 8. Brake system
+ 9. A running gear
+ 10. A body
+ 11. An electric equipment
+ 12. The basic malfunctions
|
PETROL ENGINES OF 1,6 L
Removal
| PERFORMANCE ORDER
|
| 1. The gauge of level of oil is located on a back part of the oil pallet. |
| 2. For access to the gauge lift a forward part of the car and fix on supports. Remove an engine mudguard. |
| 3. Merge engine oil in the pure container and establish маслосливную a stopper, having tightened its demanded moment. |
| 4. Disconnect an electric socket from the gauge. |
| 5. On engines with the steel stamped pallet unscrew bolts of fastening and remove the gauge together with a lining. |
| 6. On engines with the cast aluminium pallet unscrew the gauge. |
|
Installation
Installation is made in sequence, return to removal.
OTHER MODELS
Removal
| PERFORMANCE ORDER
|
| 1. The gauge of level of oil is located in the oil pallet which is necessary for removing preliminary. |
| 2. After pallet removal disconnect an electric socket from the gauge. |
| 3. Unscrew screws and remove the gauge from the oil pallet. |
|
Installation
| PERFORMANCE ORDER
|
| Installation is made in sequence, return to removal. Thus it is necessary to put the means interfering unscrewing of bolts on a carving of bolts of fastening of the gauge. |
|
|
|