Opel Vectra B

Since 1995 of release

Repair and car operation



Opel of Vektra
+ 1.1. Controls and control devices
+ 2. Maintenance service
+ 3. Engines
- 4. Heating, ventilation
   - 4.1. Cooling system
      4.1.1. Introduction
      4.1.2. Technical characteristics
      4.1.3. Hoses of system of cooling
      4.1.4. A radiator
      4.1.5. The thermostat
      4.1.6. The radiator fan
      4.1.7. The additional fan of a radiator on diesel engines of 1,7 l
      4.1.8. The additional electropump of cooling on diesel engines of 1,7 l
      - 4.1.9. Electric gauges
         4.1.9.1. The gauge of temperature of a cooling liquid
         4.1.9.2. A temperature-sensitive element of the fan of a radiator
         4.1.9.3. The gauge of level of a cooling liquid
      4.1.10. The water pump
   + 4.2. A heating system and ventilation
   4.3. Air central air
+ 5. Fuel system
+ 6. Systems of start, ignition
+ 7. Transmission
+ 8. Brake system
+ 9. A running gear
+ 10. A body
+ 11. An electric equipment
+ 12. The basic malfunctions


9fd37707

4.1.9. Electric gauges

4.1.9.1. The gauge of temperature of a cooling liquid

Removal

PERFORMANCE ORDER
1. Merge cooling liquid from cooling system.
Petrol engine SOCH of 1,6 l
2. Unscrew a bolt and remove draught of the jack of a twisting moment on the right side of the engine.
3. Disconnect an electric socket from the gauge of temperature of the cooling liquid, the thermostat located on a casing on the right side of the block of cylinders.
4. Unscrew and remove the gauge from a thermostat casing.
Petrol engines DOCH 1.6, 1.8 and 2,0 l
5. Remove the ignition block.
6. Remove an electric socket from the gauge of temperature of the cooling liquid, located on a casing on the left side of a head of the block of cylinders.
7. Unscrew the gauge.
Diesel engines
8. The temperature gauge is located on a thermostat casing. On the engine of 1,7 l the casing is on the left end of a head of the block of cylinders. On engines of 2,0 l the gauge is on the right forward part of a head of the block of cylinders (it is specified by an arrow).
9. Merge cooling liquid from cooling system.
10. Disconnect an electric socket and unscrew the gauge from a thermostat casing.

Installation

PERFORMANCE ORDER
Installation is made in sequence, return to removal. Fill in cooling liquid in cooling system.