| 1. Remove a wire of weight from the accumulator. |
|
2. Open a back door and remove a loudspeaker lattice. |
|
3. From the handle of opening of a door remove bottom plastic заглушку. |
|
4. Remove top заглушку or the switch electric window lifterа. |
|
5. Unscrew the top screws of fastening of the internal handle of opening of a back door. |
|
6. Remove the handle of opening of a door. |
| 7. Completely close a window and note a handle arrangement window lifterа. |
|
8. Release скобу fastenings and remove the handle. |
|
9. Скоба it is released if to insert a pure fabric between the handle and an upholstery of a door and, stretching a fabric opposite to the ends скобы, hook скобу and release it. Thus it is necessary to pull the handle on itself that she after clearing скобы has acted in film with шлицов window lifterа. |
|
10. Remove a handle washer window lifterа. |
|
11. Remove a plastic decorative overlay from the top part of a back door. |
|
12. Unscrew screws, fastening the basis of an upholstery of a back door. |
|
13. Using a screw-driver with a wide edge, separate an upholstery of a door from a door. |
|
14. Remove an upholstery of a door from the button of blocking of a door. |
|
15. If it is necessary, remove a protective film from the interior of a door |