Opel Vectra B

Since 1995 of release

Repair and car operation


Opel of Vektra
+ 1.1. Controls and control devices
+ 2. Maintenance service
+ 3. Engines
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. Systems of start, ignition
+ 7. Transmission
+ 8. Brake system
+ 9. A running gear
- 10. A body
   10.1. Introduction
   10.2. Care of a body
   10.3. Care of an upholstery and rugs
   10.4. Repair of insignificant damages of a body
   10.5. Repair of strong damages of a body
   10.6. A forward bumper
   10.7. A back bumper
   10.8. A radiator lattice
   10.9. A cowl
   10.10. Cowl racks
   10.11. A cable of the lock of a cowl
   10.12. Doors
   + 10.13. A door upholstery
   10.14. The internal handle of a door
   10.15. The external handle of opening of a forward door
   10.16. The external handle of opening of a back door
   10.17. The lock of a forward door
   10.18. The lock of a back door
   10.19. Стеклоподъемник doors
   10.20. Door glass
   10.21. A luggage carrier cover
   10.22. The lock of a cover of a luggage carrier
   10.23. The cylinder of the lock of a cover of a luggage carrier
   + 10.24. A back door
   10.25. Racks of a back door
   10.26. The lock of a back door
   10.27. The cylinder of the lock of a back door
   + 10.28. System of the central blocking
   + 10.29. Electric window raiser
   + 10.30. External rear-view mirrors
   10.31. A forward seat
   10.32. A pillow of a back seat
   10.33. A back of a back seat
   10.34. A seat belt of a forward seat
   10.35. The lock of a forward seat belt and the tension mechanism
   10.36. A seat belt of a back seat and a drum
   10.37. The central console
   10.38. The panel of devices
+ 11. An electric equipment
+ 12. The basic malfunctions



10.38. The panel of devices
THE GENERAL DATA

The panel of devices

Removal

PERFORMANCE ORDER
1. Remove a wire of weight from the accumulator.
The prevention

After a detachment of the accumulator wait at least 1 minute that condensers of a control system were discharged by a safety pillow.
2. Remove a steering wheel.
3. Disconnect a wire from a safety air cushion.
4. Remove switches of a screen wiper and turns.
5. Remove the ignition lock.
6. Remove the management block иммибилайзером.
7. From outside the driver remove furnish of the bottom part of the panel of devices.
8. Disconnect and remove an air line.
9. Remove a radio receiver.
10. Remove the block of management of a heater.
11. Remove air lines.
12. Remove a ware box.
13. Remove the central console.
14. At presence, remove a safety pillow from outside the passenger.
15. Remove internal furnish of forward racks.
16. From under the panel uncover, closing pipelines of a cooling liquid.
17. From a forward part of the panel remove nozzles of giving of air to a windscreen.
18. Remove lateral furnish of niches for feet.
19. Remove air lines of heating of the left and right party.
20. Disconnect скобы fastenings of a plait of wires to an arm.
21. Lift a plait of wires from an arm.
22. Unscrew bottom (arrows) and the top screws of fastening of an arm of a plait of the wires located under the panel of devices.
23. Disconnect an electric socket of a plait of the wires, located on the right side of a motor compartment.
24. Unscrew a bolt and disconnect the tyre of grounding from the basis of a forward rack. Also disconnect the tyre of grounding from an arm of a steering column.
25. Remove the hydraulic modulator of system ABS, then disconnect an electric socket of a plait of wires and take a plait in car salon.
26. Uncover the block with fuses, unscrew a bolt and remove the block.
27. Unscrew bolts, fastening the panel of devices to a partition of a motor compartment and remove it together with electric wires.

Installation

Installation is made in sequence, return to removal.