| 1. Check up a condition drivers belts on all their length. Also check up pulleys on presence of notches, cracks, deformation and corrosion. |
| 2. Remove a casing of the air filter. |
| Privodnoj belt of the compressor of an air conditioning on engines of 1,7 l |
| 3. Loosen the a bolt of a pulley of the mechanism of a tension and ослабьте a belt tension, rotating a regulator bolt. Remove a belt from pulleys. |
| 4. Establish a new belt on pulleys. A belt tension carry out, using a regulator bolt. Thus the deflection of a belt from pressing by a hand thumb long branches of a belt should make about 10 mm. |
| 5. Tighten the demanded moment a bolt of fastening of a pulley of the mechanism of a tension and establish a casing of the air filter. |
| Privodnoj belt of the pump of the amplifier of a steering of the engine of 1,7 l |
| 6. On models with an air conditioning remove приводной a compressor belt. |
| 7. Loosen the bolts of fastening of the pump, ослабьте a belt also remove it from pulleys. |
| 8. Establish a new belt on pulleys. A belt tension carry out pump moving. Thus the belt deflection by pressing by a hand thumb a long branch of a belt should make 10 mm. |
| 9. Establish приводной a belt of the compressor of an air conditioning and a casing of the air filter. |
| Privodnoj belt of the generator on the engine of 1,7 l |
| 10. Lift a forward part of the car and fix on supports. Remove the right forward wheel. |
| 11. Remove приводной a belt of the pump of the amplifier of a steering. |
| 12. Loosen the bolts of fastening of the generator and, moving the generator to the engine, ослабьте a tension drive a belt also remove it from pulleys. |
| 13. Establish a new belt on pulleys. A belt tension carry out, moving the generator from the engine. Thus the deflection of a belt from pressing by a thumb long branches of a belt should make 10 mm. Tighten bolts of fastening of the generator the demanded moment. |
| 14. Establish приводной a belt of the pump of the amplifier of a steering and the air conditioning compressor. |
| 15. Establish a wheel and lower the car. |
| Auxiliary приводной a belt of the engine of 2,0 l |
| 16. Lift a forward part of the car and fix on supports. Remove the right forward wheel. |
| 17. Note an arrangement drive a belt on pulleys. |
|
18. A wrench turn a basic plate of a pulley of the mechanism of a tension, release a belt and remove it from pulleys. |
| 19. Put on new приводной a belt pulleys. |
| 20. Loosen the the tension mechanism drive a belt also establish a belt on a pulley then slow release the tension mechanism drive a belt. |
| 21. Establish a wheel and lower the car. |
| 22. Establish a casing of the air filter. |