Opel Vectra B

Since 1995 of release

Repair and car operation



Opel of Vektra
+ 1.1. Controls and control devices
+ 2. Maintenance service
+ 3. Engines
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. Systems of start, ignition
- 7. Transmission
   + 7.1. Coupling
   + 7.2. A mechanical transmission
   - 7.3. An automatic transmission
      7.3.1. Introduction
      7.3.2. Technical characteristics
      7.3.3. Oil replacement in a transmission
      7.3.4. Adjustment of the lever of the selector
      7.3.5. A selector cable
      7.3.6. The selector lever
      7.3.7. Replacement of a sealing ring of the hydrotransformer
      7.3.8. Electric elements of management of a transmission
      7.3.9. The switch of a manner of movement
      7.3.10. The electronic control device
      7.3.11. Gauges of an entrance and conducted shaft of a transmission
      7.3.12. The gauge of temperature of oil of a transmission
      7.3.13. Removal and transmission installation
      7.3.14. Transmission major repairs
   + 7.4. Power shafts
+ 8. Brake system
+ 9. A running gear
+ 10. A body
+ 11. An electric equipment
+ 12. The basic malfunctions



7.3.2. Technical characteristics
THE GENERAL DATA

Type
With four transfers of a forward course and the backing transfer, operated the computer
Identification:
  – Engines of 1.6 litres
AF13
  – Engines of 1.8 and 2.0 litres
AF20
Greasing
Oil type
Dexron II type ATF
Capacity of oil
3.0 - 3.5 l.

The tightening moments (Н.м.)

Drain stopper of oil
35
Bolts of fastening of a transmission to the engine:
  – M8
20
  – M10
40
  – M12:
     • engines of 1.6 litres
60
     • engines of 1.8 and 2.0 litres
75
The temperature gauge
25
The gauge of speed of an entrance shaft
6
The gauge of speed of a conducted shaft
6
The selector lever:
  – A nut of a point of turn
28
  – To a body
10
The hydrotransformer
55