Opel Vectra B

Since 1995 of release

Repair and car operation



Opel of Vektra
+ 1.1. Controls and control devices
+ 2. Maintenance service
+ 3. Engines
+ 4. Heating, ventilation
- 5. Fuel system
   + 5.1. Fuel system of petrol engines
   - 5.2. Fuel systems of the diesel engine
      5.2.1. Introduction
      5.2.2. Technical characteristics
      5.2.3. The air filter and air inlet channels
      5.2.4. An accelerator pedal
      5.2.5. Filling and prorolling of fuel system
      5.2.6. The gauge of level of fuel
      5.2.7. A fuel tank
      5.2.8. Check and adjustment of the maximum turns
      5.2.9. Start of the cold engine
      + 5.2.10. Electric knots of system of injection
      5.2.11. The fuel pump of a high pressure
      5.2.12. Check of the moment of injection of fuel
      5.2.13. Adjustment of the moment of injection of fuel
      5.2.14. Fuel atomizers
      5.2.15. Турбонагнетатель
      5.2.16. The heat exchanger
      5.2.17. An inlet collector
      5.2.18. A final collector
+ 6. Systems of start, ignition
+ 7. Transmission
+ 8. Brake system
+ 9. A running gear
+ 10. A body
+ 11. An electric equipment
+ 12. The basic malfunctions



5.2.2. Technical characteristics
THE GENERAL DATA

Adjusting data
Idling turns:
  – Engines of 1.7 litres:
     • the normal
780 – 880 rpm
     • start of the cold engine
950 – 1000 rpm
  – Engines of 2.0 litres
750 – 850 rpm – cope ECU
The maximum turns:
  – Engines of 1.7 litres
5200 rpm
  – Engines of 2.0 litres
From 4900 to 5100 rpm – copes ECU
The fuel pump
Rotation direction
Clockwise, if to take a detached view a belt
Installation of the fuel pump:
  – Engines of 1.7 litres:
     • a starting position
The piston of 1 cylinder in ВМТ
     • adjusting distance
0.55 ± 0.05 mm
  – Engines of 2.0 litres
Copes ECU
Atomizers
Pressure of opening:
  – Engines of 1.7 litres
142 – 162 bar
  – Engines of 2.0 litres
180 bar

The tightening moments (Н.м.)


Engines of 1.7 litres
Nuts of fastening of a forward pipe to турбонагнетателю
65
Final collector:
  – Nuts and bolts
24
  – A suspension bracket arm
51
Returnable tube of a fuel atomizer
29
Fuel atomizers
50
Connecting nuts топливопроводов
25
Final collector
24
The fuel pump:
  – Forward nuts
23
  – Back bolts:
     • bolts M8
25
     • bolts M10
40
Stopper of a viewing aperture
20
Nut of a pulley of a gear belt
69
Турбонагнетатель:
  – A pipe of a cooling liquid
8
  – To an exhaust pipe
27
  – To a collector
27
Engines of 2.0 litres
Pedal of management of fuel giving
20
The pressure gauge
8
Bolt of an asterisk of a camshaft:
  – A stage 1
90
  – A stage 2
To tighten on a corner 60 °
  – A stage 3
To tighten on a corner 30 °
The gauge of temperature of a cooling liquid
18
The gauge of a cranked shaft
8
Reception exhaust pipe:
  – To an intermediate pipe
12
  – To турбонагнетателю
20
Final collector:
  – Nuts
22
  – A suspension bracket arm
25
Connecting nuts топливопроводов
25
The fuel pump:
  – Forward assembly bolts
25
  – Bolts топливопроводов
15
  – A back suspension bracket
20
  – A bolt of a cover of an asterisk
6
  – An asterisk bolt
20
Final collector:
  – The bottom section
22
  – The top section to the bottom
8
Chain:
  – The tension mechanism (the top and bottom bolt)
60
  – The top directing chains
8
Турбонагнетатель:
  – An exhaust ledge
30
  – A pipe bringing oil
20
  – Returnable маслопровод:
     • a connecting nut to the block of cylinders
25
     • to турбонагнетателю
8
     • to a collector
30