Opel Vectra B

Since 1995 of release

Repair and car operation



Opel of Vektra
+ 1.1. Controls and control devices
+ 2. Maintenance service
+ 3. Engines
- 4. Heating, ventilation
   + 4.1. Cooling system
   - 4.2. A heating system and ventilation
      4.2.1. Introduction
      - 4.2.2. Elements of system of heating
         4.2.2.1. The resistor of the engine of the fan
         4.2.2.2. The engine of a supercharger of a heater
         4.2.2.3. The control panel a heater
         4.2.2.4. A heater casing
         4.2.2.5. A heater radiator
         4.2.2.6. The heater switch
         4.2.2.7. The vacuum tank
         4.2.2.8. The vacuum chamber
         4.2.2.9. The electronic block of management of a climate
         4.2.2.10. The electronic gauge of temperature
         4.2.2.11. An electronic regulator of the fan
   4.3. Air central air
+ 5. Fuel system
+ 6. Systems of start, ignition
+ 7. Transmission
+ 8. Brake system
+ 9. A running gear
+ 10. A body
+ 11. An electric equipment
+ 12. The basic malfunctions



4.2.2.3. The control panel a heater

Removal

PERFORMANCE ORDER
1. Using a screw-driver edge as the lever, remove a decorative overlay of the control panel a heater.
2. Remove handles of management of a heater.
3. Unscrew the top screws of the control panel a heater.
4. Move the control panel a heater upwards and take it from the panel.
5. Disconnect electric sockets from a back part of the control panel a heater.
6. Note position of ropes then release скобы and disconnect ropes (the arrow specifies an arrangement of an element of fastening of a cover of a torso of management by a heater). For full removal of cables of management by a heater disconnect them from a heater casing.

Installation

Installation is made in sequence, return to removal.