Opel Vectra B

Since 1995 of release

Repair and car operation



Opel of Vektra
+ 1.1. Controls and control devices
+ 2. Maintenance service
+ 3. Engines
+ 4. Heating, ventilation
+ 5. Fuel system
+ 6. Systems of start, ignition
+ 7. Transmission
+ 8. Brake system
+ 9. A running gear
+ 10. A body
- 11. An electric equipment
   - 11.1. The electric equipment
      11.1.1. Introduction
      11.1.2. Technical characteristics
      11.1.3. Electric chains
      11.1.4. Detection of not closed chain
      11.1.5. Safety locks and the relay
      11.1.6. Switches
      11.1.7. Bulbs of external illumination
      11.1.8. Bulbs of internal illumination
      11.1.9. Devices of external illumination
      11.1.10. Adjustment of light of headlights
      11.1.11. A combination of devices
      11.1.12. Screen wiper levers
      11.1.13. The screen wiper and draught engine
      11.1.14. The engine of a screen wiper of a back door
      11.1.15. Washer
      11.1.16. A radio tape recorder
      11.1.17. Loudspeakers
      11.1.18. A safety pillow
      11.1.19. Elements of a pillow of safety
   + 11.2. Electroschemes
+ 12. The basic malfunctions



11.1.15. Washer TANK СТЕКЛООМЫВАТЕЛЯ

Arrangement of a tank and the washer pump

The tank and the washer pump are located behind a forward bumper.


PERFORMANCE ORDER
1. Remove a forward bumper.
2. Remove the left forward loose leaf of an arch of an arch of a wheel.
3. Establish the container under the washer pump.
4. Disconnect electroconducting from the top part of the pump of a washer.
5. Remove from the pump a hose and merge a liquid in the container.
6. On models with a washer of headlights disconnect electroconducting and a hose from the additional pump on a tank.
7. Remove a stopper from a tank.
8. Release electroconducting from скоб fastenings on the top part of a tank.
9. Unscrew a bolt of fastening and remove a washer tank.
10. Installation is made in sequence, return to removal.

THE WASHER PUMP

PERFORMANCE ORDER
1. Remove a forward bumper.
2. Remove the left forward loose leaf of an arch of an arch of a wheel.
3. Establish the container under the washer pump.
4. Disconnect electroconducting from the top part of the pump.
5. Disconnect a hose from the pump of a washer and merge a liquid in the container.
6. Pull the pump and take it from a washer tank.
7. If it is necessary, replace a sealing ring in a washer tank.
8. Installation is made in sequence, return to removal.